Rockwell Automation RECOMM-ENET EtherNet/IP Communications Module - Manual (Page 104)

9-2 EtherNet/IP Communications Module
To view the module’s web pages:
Step 1. On a computer with access to the EtherNet/IP network on
which the module is installed, start a web browser (for
example, Microsoft™ Internet Explorer (version 5.0 or
greater) or Netscape™ Navigator™ (version 4.6 or
greater) software.
The computer can access the web pages if it is
connected to the same network as the module or if it is
connected to a network with access to the module’s
network via a gateway device (for example, a router).
Step 2. In the Address (Explorer) or Location (Navigator) box,
type http://, then type the IP address of the module, and
finally press ENTER. The main page for the module
appears as shown in figure 9.1.
Important:Clicking the browser’s Refresh button always re-displays
the Home page even while viewing another module we
page.
Figure 9.1 – Main Web Page for the Module