Rockwell Automation RECOMM-ENET EtherNet/IP Communications Module - Manual (Page 28)

4-2 EtherNet/IP Communications Module
4.2 Using the LCD OIM to Configure the
Module
4.2.1 SP600 and LiquiFlo 2.0
Use the procedure in figure 4.1 to access the parameters on the
EtherNet/IP module using the LCD OIM. If you are unfamiliar with
the operation of the LCD OIM, refer to the Reliance Electric Drive
User Manual for more information.
Figure 4.1 – Accessing the Module Parameters using the LCD OIM (SP600, LiquiFlo)
P0: SP600
>> Auto Stopped
Main Menu
Device Select
Use to select
RECOMM-ENET.
P0: SP600
>> Auto Stopped
P5: RECOMM-ENET
>> Auto Stopped
Main Menu
Parameters
Device: Port 0
SP600
RECOMM-ENET
Monitor Lang
Edit the EtherNet/IP
parameters using the
same techniques as for
drive parameters. Use to highlight
Device Select icon