1 to configure e-mail notification – Rockwell Automation RECOMM-ENET EtherNet/IP Communications Module User Manual
Page 110
Advertising
Viewing the Module’s Web Pages
9-8
For more information, see section 4.10, Setting Web Access
Control.
9.4.1 To configure e-mail notification
Step 1.
Click the desired “Send an e-mail message when ...”
check boxes you want to occur that will send e-mail
notification. If you only want e-mail notification when
selected faults/alarms occur:
• Click the respective fault and/or alarm radio buttons.
• Click the “selected faults” link and/or “selected alarms”
link.
Figure 9.4 – Configuration of E-mail Notification Web Page
Advertising