ADLINK AMP-208C - Manual (Page 24)

10 Getting Start with The Installation
2.2 AMP-204C / AMP-208C Exterior Profile Diagram
Figure 2-1: AMP-204C exterior profile diagram
P1
: for Motion control command, Position feedback, and Servo I/O
feedback. (with SCSI 100-PINS connector)
P2:
for 16 channel digital TTL I/O. (with DSUB 37-PINS connector)
SW2:
Card ID setup (0-15)
NOTE NOTE
Dimension in unit of millimeter (mm).
P1
P2
SW2