ADLINK AMP-208C User Manual
Page 41
Advertising
Getting Start with The Installation
27
AMP-204C / AMP-208C
7. J6: This is one 5-PINS connector for connecting to four
isolation digital output channel.
8. P2: This is one DSUB 37-PINS connector for connecting
to 16 channel digital input signal and 16 channel digital
output signal in the controller (TTL).
9. IOIF1-IOIF4: These are four 9-PINS connectors for
connecting to 16 channel digital input signal and 16
channel digital output signal for common uses.
10.CN1: This is one 9-pin connector for laser control.
Advertising
This manual is related to the following products: