3 s1, s2: edo/alm_rst selection switch, S1, s2: edo/alm_rst selection switch – ADLINK AMP-208C User Manual
Page 51
Advertising
Getting Start with The Installation
37
AMP-204C / AMP-208C
2.8.3
S1, S2: EDO/ALM_RST Selection Switch
DIN-825-GP4 is equipped with 4 servo drive reset signals. You
may set up CMA1~CMA4 PIN 10 and CMP1~CMP4 PIN 10 for
servo drive rest or J6 connector DO.1~DO.4 by switch S1 and S2.
Reset servo drive
Reset servo drive
Reset servo drive
Reset servo drive
Advertising
This manual is related to the following products: