ADLINK AMP-208C - Manual (Page 46)

32 Getting Start with The Installation
• J5
• J6
• IOIF1:
No. Name I/O Function of Axis No. Name I/O Function of Axis
1 I24V -- Ext. power supply, +24V 4 DOCOM -- Digital output common
2 IGND -- Ext. power ground 5 EEMG | Ext. Emergency signal
3 DICOM -- Digital input common 6 -- -- --
NOTE NOTE
1. Please connect DICOM to external power supply
(24VDC in general) if possible.
2. Please connect DOCOM to ground (GND) of
external power supply if possible.
No. Name I/O Function of Axis No. Name I/O Function of Axis
1 EDO1 c Digital output, (1) 4 EDO4 c Digital output, (4)
2 EDO2 c Digital output, (2) 5 DOCOM c Digital output common
3 EDO3 c Digital output, (3) 6 -- c --
No. Name I/O Function of Axis No. Name I/O Function of Axis
1 DI1 I
Additional isolated digital
input, (1)
6 DI6 I
Additional isolated digital
input, (6)
2 DI2 I
Additional isolated digital
input, (2)
7 DI7 I
Additional isolated digital
input, (7)
3 DI3 I
Additional isolated digital
input, (3)
8 DI8 I
Additional isolated digital
input, (8)
4 DI4 I
Additional isolated digital
input, (4)
9 DICOM -- Digital input common
5 DI5 I
Additional isolated digital
input, (5)
-- -- -- --