Kyocera DuraForce Pro - Manual (Page 127)

Connectivity 117
3. Tap the ON/OFF switch to turn Wi-Fi on .
 Wi-Fi is enabled. You will see the names and security settings of in-range Wi-Fi networks.
 To disable Wi-Fi, tap the switch again .
4. Tap a Wi- Fi network to connect, enter the password (if it’s not an open network), and then tap
CONNECT.
 Your phone is connected to the Wi-Fi network. You will see ( ) in the status bar.
 The password, for a household wireless LAN router, is sometimes found on a sticker on the
router (WEP, WPA, KEY, etc.). Contact the router manufacturer for information. For
password for a public wireless LAN, check with user's service provider.
 Entering a password is not required if an access point is not security protected.