Drying your phone – Kyocera DuraForce Pro User Manual
Page 237
Cleaning and Drying Procedures
227
Drying Your Phone
If your phone has been exposed to any form of liquid, please follow the steps below to dry it before use.
CAUTION! If your phone has been submerged in water, for example to use the camera in Underwater
Mode, be sure to remove the back cover and rinse all surfaces of the phone thoroughly with clean, fresh
water before drying.
1. Wipe down all outside surfaces of your phone with a clean lint-free cloth.
2. If not already done, remove the back cover and wipe the back side of the phone and the inside
surface of the back cover.
3. Hold the phone firmly and gently shake it a few times to displace surface water.
4. Pat with a clean dry cloth to remove moisture from speakers, microphones (2), earpiece, and
pressure adjustment hole. Repeat patting each area about 20 times.