Kyocera DuraForce Pro - Manual (Page 16)

Set Up Your Phone 6
2. Plug the smaller end of the USB cable into the phone’s Charger/USB port.
3. Plug the other end of the USB cable into the AC adapter, and then plug the adapter into an
electrical outlet. Be sure to use the AC adapter that came with your phone.
4. When charging is complete, remove the cable from the port and close the cover. Press around
the edges of the cover to ensure that it is securely closed.
Note: Your phone ’s battery should have enough charge for the phone to turn on and find a signal, set up
voicemail, and make a call. You should fully charge the battery as soon as possible.
Warning: Be sure all ports and covers are properly sealed to maintain the phone ’s waterproof capability.
 Fully charging a battery may take up to three hours.
5. After charging, disconnect the phone from the charger.
 Unplug the AC adapter from the outlet, and remove the USB cable from the phone and the
AC adapter.
Charge Using a PC Connection
Before using a PC connection to charge your phone, ensure that the computer is turned on. Depending
on the type of connection, your phone’s battery may not charge.
1. Insert the small end of the USB cable into the phone ’s charger/USB port.
2. Insert the large end of the USB cable into an external USB port on your computer.
3. After charging, remove the USB cable from both the phone and the computer.
Charge the Battery Wirelessly
Your phone supports the PMA standard via a wireless charging accessory (sold separately). Follow the
steps below to charge the battery using a wireless charger.