Kyocera DuraForce Pro - Manual (Page 194)

Device Settings 184
1. From home, tap Apps > Settings > Display > Cast.
2. If Wireless display is not switched on, tap and select the Enable wireless display check box
to turn it on. Available devices will be displayed.
3. Select a device you want to connect to from the list.
Note: For more information about wireless display, see the documentation that comes with the Miracast-
certified device you wish to use with your phone.
Sound and Notification Settings
The sound and notification settings menu lets you control your phone’s audio, from ringtones and alerts to
tap tones and notifications.
Sound and Notification Settings Overview
The sound and notification settings menu allows you to configure the following options:
Sound and Notification
Setting
Description
Media volume Adjust the volume level settings for the media.
Alarm volume Adjust the volume level settings for the alarm.
Ring volume Adjust the volume level settings for the ring volume.
Notification volume Adjust the volume level settings for the notification volume.
Also vibrate for calls Set your phone to ring and vibrate simultaneously.
Do not disturb
Configure the feature to prevent interruptions from calls and alerts. You
can switch between Priority only, Alarms only, Total silence, or Vibrate.
Phone ringtone Assign a ringtone to your incoming calls.
Vibration pattern Assign the vibration pattern.
Vibration intensity Select your phone ’s vibration intensity.
Default notification
ringtone
Select a sound for notifications.
Other sounds
Set your phone ’s sound and notification tone feature with various options,
such as Dial pad tones, Screen locking sounds, Hearing aids, Noise
reduction, etc.