H3C Technologies H3C Intelligent Management Center - Manual (Page 116)

94
12. Click Back to return to the radio batch configuration page.
NOTE:
To avoid configuration failures, HP recommends that you configure radios on fit APs of the same model
in batches.
Configuring WLAN logical interfaces
Service policies are bound to the WLAN logical interfaces of an AC. A WLAN logical interface can
be bound only to one service policy.
You can access the WLAN Logical Interface Configuration page from the AC list page, the AC details
page, or the configuration management page. The following information uses the AC list page as an
example.
Viewing the WLAN logical interface list
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Resource Management > ACs. The AC List
page displays all ACs.
3. Click the Operation icon for the AC you want to view.
4. Select Wireless Logical Interface Configuration from the menu.
The Wireless Logical Interface Configuration page appears. All the WLAN logical interface
information of the AC is displayed on the Wireless Logical Interface List.
WLAN Logical Interface List
{
Description—Interface description in the format of WLAN-ESSinterface ID.
{
SSID—Unique SSID of the service policy bound to the WLAN logical interface. Click the
name to view its details.
{
Port Security Mode—Port security mode for the WLAN logical interface. Options are:
− noRestrictions
− mac-and-psk
− mac-authentication
− mac-else-userlogin-secure
− mac-else-userlogin-secure-ext
− psk
− userlogin-secure
− userlogin-secure-ext
− userlogin-secure-or-mac
− userlogin-secure-or-mac-ext
− userlogin-secure-ext-or-psk
− userlogin-withoui
{
VLAN—VLAN to which the WLAN logical interface belongs.