H3C Technologies H3C Intelligent Management Center - Manual (Page 206)

184
− 802.11n(5GHz)
{
Location—Enter or select the name of the location view to which the fat AP belongs. WSM
supports fuzzy matching for this field.
An empty field or a field that is set to Unlimited does not serve as a query criterion.
9. Click Query.
The Radio List displays all radios matching the query criteria. Click Reset to clear the query
criteria and display all radios.
NOTE:
To avoid configuration failures, use batch mode to configure radios on fat APs of the same model.
10. Select the desired radios.
11. To close the Select Radio window, click OK.
The Radio List displays all of the selected radios.
12. Click OK.
WSM starts configuring the selected radios, and displays the operation results when the
operation is complete.
13. To return to the Radio Batch Configuration page, click Back.
Managing WLANs
WLANs allow you to configure the VSC for fat APs. After being bound to radios on a fat AP, a
WLAN deploys the VSC to fat APs so they can provide wireless services for clients.
You can access the WLAN configuration feature from the Fat AP List page or the Fat AP Details page.
This information uses the Fat AP List page as an example.
Viewing WLANs on a fat AP
1. Click the Service tab.
From the navigation tree, select WLAN Manager > Resource Management > Fat APs. The Fat
AP List page displays all fat APs.
2. Click the Operation icon of the target MSM series fat AP.
3. Select WLAN Configuration from the menu.
The WLAN List and Radio List display all WLANs and radios on the fat AP.
WLAN List contents
{
SSID—SSID of the WLAN. Click the SSID of a WLAN to view its details.
{
Status—State of the WLAN. Options are Enable and Disable. A WLAN can provide wireless
services only when it is in the Enable state.
{
VLAN ID—VLAN ID bound to the WLAN. Clients that access the WLAN are added
automatically to the bound VLAN.
{
Encryption Mode—Encryption mode used by the WLAN: None, Static WEP, Dynamic WEP,
WPA Pre-Shared Key, or WPA 802.1X. This parameter must be configured on the web
manager of the fat AP.