H3C Technologies H3C Intelligent Management Center - Manual (Page 201)

179
12. Select the desired fat APs.
13. Click OK.
The selected fat APs appear in the Fat AP List on the Batch Create WLANs page.
14. Click OK.
WSM starts creating the WLANs on the selected fat APs, and displays the operation results
when the operation is complete.
15. Click Back to return to the Batch Create WLANs page.
Batch modifying WLANs
This function allows you to modify, in batches, the WLANs with the same SSID created on multiple fat
APs. Before the operation, make sure the WLAN with the specified SSID exists on the target fat AP.
Otherwise, the operation fails.
To modify WLANs in batches:
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Configuration Management.
The Configuration Management page appears.
3. Click the MSM tab.
4. In the Fat AP Batch Configuration Management (HP) area, click WLAN Batch Configuration.
NOTE:
The Fat AP Batch Configuration Management (HP) area appears on the configuration
management page only after at least one MSM series fat AP has been added to the IMC Platform.
5. In the WLAN Batch Configuration area, click Batch Modify WLANs.
The Batch Modify WLANs page appears.
6. Modify the WLAN parameters as needed. For information about the WLAN parameters, see
"
Batch creating WLANs ."
7. In the Selected Devices area, select the fat APs where you want modify the WLANs. Options are
All Fat APs and Selected Fat APs.
{
All Fat APs—Select this option to modify the WLANs with the specified SSID on all managed
fat APs in IMC. Then go to step 13.
{
Selected Fat APs—Select this option to modify the WLANs with the specified SSID only on
the selected fat APs.
If the Selected Fat APs option is selected, the page refreshes to displays the Fat AP List area.
8. In the Fat AP List area, click Add to display the Select Devices dialog box.
9. Enter or select one or more of the following query criteria to search for the fat APs where the
WLAN is to be modified:
{
Device Label—Enter the label of the fat AP. WSM supports fuzzy matching for this field
{
IP Address—Enter the IPv4 address of the fat AP. WSM supports fuzzy matching for this field.
{
Model—Enter the model of the fat AP. WSM supports fuzzy matching for this field
{
Connectivity Status—Select a connectivity state for the fat AP. Options are Unlimited,
Reachable, and Unreachable.