Displaying signal strengths on the map, Displaying transmission rates on the map – H3C Technologies H3C Intelligent Management Center User Manual
Page 525
503
Displaying signal strengths on the map
You can display signal strengths on the map in the following way:
Right-click on a blank area, and from the shortcut menu, select one of the following:
•
Show Signal Cover Area > By Signal > 2.4GHz
•
Show Signal Cover Area > By Signal > 5GHz
The map displays the signal coverage area for each AP. Click to view signal strengths, as shown
in
.
Figure 58 Displaying signal strengths (2.4 GHz)
Displaying transmission rates on the map
You can display transmission rates on the map in the following way:
Right-click on a blank area, and from the shortcut menu, select one of the following:
•
Show Signal Cover Area > By Rate > 2.4GHz
•
Show Signal Cover Area > By Rate > 5GHz
The map displays the signal coverage area of each AP. Click to view transmission rates, as shown
in