H3C Technologies H3C Intelligent Management Center - Manual (Page 73)

51
Viewing the AC list
The AC List page displays information about all managed ACs in IMC.
To view the AC list:
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Resource Management > ACs. The AC List
page displays all ACs.
AC List contents
{
Status—Current alarm status of the AC.
{
Device Label—Device label of the AC. Click the device label of an AC to view its details.
A device label that carries an icon
indicates the AC is a team AC, and the AC details
page displays the team information and the team members.
A device label that carries an icon
indicates that the management console of the AC is
not the WSM server host, and that some of the management functions in IMC are not
available for the AC. Operators can log in to the Web Manager of the AC, specify the
WSM server host (by IP address) as the AC's management console, and then synchronize
the AC to IMC. After that, the icon
disappears.
NOTE:
A team AC contains multiple ACs that work together to provide wireless services. You cannot
configure team ACs in WSM. To do so, you must log in to the web manager of a specific AC.
{
Model—Model of the AC.
{
IP Address—IP address of the AC when it was added to IMC. For a team AC, this field
displays the virtual IP address of the team AC.
{
Total APs—Total number of fit APs managed by the AC. Click the number to view all of the
managed fit APs.
{
Online APs—Number of online fit APs managed by the AC. Click the number to view all of
the managed online fit APs.
{
Online Clients—Number of clients that are associated with the fit APs managed by the AC.
Click the number to view the online clients.
{
Last Sync Time—Time when the AC configuration was last synchronized.
{
Sync Result—Last synchronization result, Succeeded or Failed.
{
Operation—Click the Operation icon for the AC to display the operation menu.
The operational tasks provided in the Operation menu are as follows:
{
Group Configuration
{
WLAN configuration
{
Radio Batch Configuration
{
Global AP Parameter Config
{
Configure AC Global Country/Region Code
{
View Topology
{
Ping