H3C Technologies H3C Intelligent Management Center User Manual
Page 677
655
•
Begin Time/End Time—These two parameters appear only when you select Custom Range. Click
the field next to Begin Time/End Time to select the start time/end time from the calendar that
appears, in the format of YYYY-MM-DD hh:mm. The end time must be later than the start time.
shows an example SSID statistics report.
Figure 112 SSID statistics report
SSID statistics report fields:
•
Report Period—Time range during which the statistics are collected.
•
Location—Name of the location view for which the statistics are collected or All AP Devices.
•
SSID—Service set identifier.
•
Transmitted Radio Traffic (MB)—Total traffic transmitted by the APs that use SSID.
•
Received Radio Traffic (MB)—Total traffic received by the APs that use the SSID.