Table 21 – H3C Technologies H3C Intelligent Management Center User Manual
Page 322
300
Table 21 Real-time monitoring information of clients
Access AP
Real-time monitoring information
MSM series fat AP/fit AP
•
Reception and transmission rate trend graph
•
Signal strength trend graph
•
Received noise trend graph
•
Signal noise ratio trend graph
•
Traffic received
•
Rx speed
•
Traffic transmitted
•
Tx speed
•
Signal strength (dBm)
•
Received noise
•
Online time
•
Signal noise ratio
Comware-based fat AP/fit AP
•
Reception and transmission rate trend graph
•
Signal strength trend graph
•
Received noise trend graph
•
Signal noise ratio trend graph
•
Traffic received
•
Rx speed
•
Traffic transmitted
•
Tx speed
•
Tx retry bytes
•
Tx retry bytes
•
Signal strength (dBm)
•
Received noise
•
Online time
•
Signal noise ratio
The client real-time monitoring page displays monitoring information in the last 150 seconds, which is
refreshed every 5 seconds.
To perform real-time monitoring for a client:
1.
Click the Service tab.
2.
From the navigation tree, select WLAN Manager > Resource Management > Clients.
The Clients page displays all clients.
3.
Click the Operation icon
of a client, and select Monitor.
The client real-time monitoring page appears.
Real-time Monitoring Information
The x coordinate changes according to the specific time in the 150 seconds.
{
Reception and transmission rate trend graph—Trend of the reception and transmission rates
of the client in the last 150 seconds. The x coordinate represents the time and the y
coordinate represents the reception and transmission rates.