H3C Technologies H3C Intelligent Management Center User Manual
Page 229
207
−
userlogin-withoui
When the encryption mode for a service policy is Clear or the security IE is None, the port
security mode wireless logical interfaces cannot be mac-and-psk, psk, or userlogin-secure-
ext-or-psk.
When the encryption mode for a service policy is Crypto and the security IE is RSN or WPA,
the port security mode wireless logical interfaces can only be any of mac-and-psk, psk,
userlogin-secure-ext-or-psk, or userlogin-secure-ext, and the key negotiation type must be
11Key. See
for port security mode information.
Table 15 Port security mode
Port security mode
Key parameters
noRestrictions None
mac-and-psk
•
Key negotiation type—Options are None and 11Key.
•
PSK type—Options are None, Pass-Phrase, and Raw-Key.
•
PSK—Enter the PSK value. If you select None for PSK type, you do
not need this field.
mac-authentication None
mac-else-userlogin-secure None
mac-else-userlogin-secure-ext None
psk
•
Key negotiation type—Options are None and 11Key.
•
PSK type—Options are None, Pass-Phrase, and Raw-Key.
•
PSK—Enter the PSK value. If you select None for PSK type, you do
not need this field.
userlogin-secure None
userlogin-secure-ext Key negotiation type. Options are None and 11Key.
userlogin-secure-or-mac None
userlogin-secure-or-mac-ext None
userlogin-secure-ext-or-psk
•
Key negotiation type—Options are None and 11Key.
•
PSK type—Options are None, Pass-Phrase, and Raw-Key.
•
PSK—Enter the PSK value. If you select None for PSK type, you do
not need this field.
userlogin-withoui None
7.
In the Fat AP List area, click Add.
The Select Device dialog box appears.
8.
Enter or specify one or more of the following query criteria to search for the fat APs you want to
configure:
{
Device Label—Enter the label of the fat AP. WSM supports fuzzy matching for this field.
{
IP Address—Enter a partial or complete IPv4 address of the fat AP. WSM supports fuzzy
matching for this field.
{
Model—Enter the model of the fat AP. WSM supports fuzzy matching for this field.
{
Connectivity Status—Specify a connectivity state for the fat AP. Options are:
−
Unlimited