Collecting information about rogue ap access ports, Querying rogue ap access ports – H3C Technologies H3C Intelligent Management Center User Manual
Page 362
340
WSM displays the PoE status of AP access ports only when the access device supports PoE and
is directly connected to the fat AP.
•
MAC Address—MAC address of the rogue AP. Click the MAC address to view its details.
•
Vendor—Vendor of the rogue AP.
•
SSID—SSID of the WLAN to which the rogue AP accesses.
•
Access Device—Label of the access device to which the rogue AP is connected. Click the access
device label to view details.
•
Access Interface—Name of the AP access port that connects the access device to the rogue AP.
•
Collect Time—Time when IMC last collected data through the AP access port that is connected to
the rogue AP.
•
Operation—Click the Operation icon
for the rogue AP to display the Operation menu. The
icon appears only when the rogue AP is directly connected to the access device.
You can enable or disable the PoE function on associated rogue AP access ports on the
Operation
menu.
If the Device List contains enough entries, the following navigational aids are displayed:
•
Click the Next Page icon
to page forward in the Device List.
•
Click the Last Page icon
to page forward to the end of the Device List.
•
Click the Previous Page icon
to page backward in the Device List.
•
Click the First Page icon
to page backward to the front of the Device List.
Click 8, 15, 50, 100, or 200 on the upper right of the Device List to specify the number of items you
want to display on each page.
NOTE:
You can sort the Device List by every field except for the Status and Operation fields. Click the column
label to sort the list by the selected field. The column label allows you to toggle between the various sort
options specific to each field.
Collecting information about rogue AP access ports
This function allows you to view connectivity between the rogue AP and the access device, and collect
information about AP access ports. For more information, see "
Collecting information about fit AP
Querying rogue AP access ports
This function allows you to filter rogue AP access ports with specific criteria.
To query rogue AP access ports:
1.
Click the Service tab.
2.
From the navigation tree, select WLAN Manager > Resource Management > Rogue AP Access
Ports.
The AP Access Ports page appears.
3.
Click the Rogue AP tab.