Ap association detail report – H3C Technologies H3C Intelligent Management Center User Manual
Page 643
621
Figure 85 AP association summary report
AP association summary report parameters:
•
Report Period—Time range during which the statistics were collected.
•
Location—Name of the location view for which the statistics were collected or All AP Devices.
AP association summary report fields:
•
Location—Location view name or All AP Devices.
•
AP Number—Number of APs contained in the location view or total number of all APs.
•
Access Requests—Total number of client access requests.
•
Access Responses—Total number of responses sent by the APs to the requesting clients.
•
Successful Accesses—Total number of times the clients were associated successfully with the APs.
•
Abnormal Logouts—Total number of times the clients associated with the APs were logged out
abnormally.
•
Client Dropping Rate (%)—Client dropping rate of the APs, which is the ratio of client abnormal
logouts to the total number of online clients.
•
Success Rate (%)—Client access success rate of the APs, which is the ratio of successful accesses
to the total number of access requests.
•
Association Congestion Rate (%)—Client association congestion rate of the APs, which is the
ratio of association failures to the total number of association requests.
AP association detail report
This report displays the detailed client association statistics for individual APs. With this report, users
can learn the access quality of individual APs and the location view to which they belong.
To view an AP association detail report, configure the following parameters:
•
Parameter "Begin Time and End Time"—Select a statistics collection time range from the list. You
can select a specific time range, such as Last Hour, Last Day, Last Week, or Last Month, or
select Custom Range, and then specify the start time and end time manually.
•
Location—Select a specific location view for statistics collection, or select All AP Devices.
•
Begin Time/End Time—These two parameters appear only when you select Custom Range. Click
the field next to Begin Time/End Time to select the start time/end time from the calendar that
appears, in the format of YYYY-MM-DD hh:mm. The end time must be later than the start time.
shows an example AP association detail report.