H3C Technologies H3C Intelligent Management Center - Manual (Page 737)

715
{
Role—An operator can be an administrator, a maintainer, or a viewer. An administrator can
manage all fit AP groups, a maintainer can manage specific fit AP groups, and a viewer can
only view specific fit AP groups.
{
Manage All Groups—Shows the privilege level for the operator.
− Yes—The operator has the privilege level to manage all fit AP groups.
− No—The operator has no privilege level to manage or view the fit AP groups.
{
Description—Description for the operator.
Fit AP List
This area displays all fit APs in the group.
{
Status—Online status of the fit AP. Position the pointer on the icon to view the status details.
− Online (Primary)—The fit AP is a Comware-based fit AP that connects to the primary
AC, and the fit AP is online.
− Online (Secondary)—The fit AP is a fit AP that connects to the secondary AC, and the
fit AP is online.
− Online—The fit AP is an MSM series fit AP, and is online.
− Offline—The fit AP is not online.
{
AP Label—Label of the fit AP.
{
SN—Serial number of the fit AP.
{
IP Address—IPv4 address of the fit AP.
{
MAC address—MAC address of the fit AP.
{
Model—Device model of the fit AP.
6. Click Close to return to the Fit AP Group List.
Adding a fit AP group
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Configuration Management.
3. Click the Common tab.
4. In the Network Management area, click Fit AP Group.
The Fit AP Group List displays all fit AP groups.
5. Click Add.
6. Specify the basic information for the fit AP group:
{
Group Name—Enter the name for the fit AP group. The name must be unique.
{
Description—Enter the description for the fit AP group.
7. In the Operators that can manage the group area, select operators to assign privileges to
manage or view the fit AP group.
{
By default, the system administrator admin always has the privilege to manage all fit AP
groups. The box before admin cannot be cleared.
{
A maintainer created with the privilege to manage all groups can manage the new fit AP
group. You can clear the box for maintainers with this privilege.