Viewing a fat ap mesh topology – H3C Technologies H3C Intelligent Management Center User Manual

Page 610

Advertising
background image

588

Left Node tab

{

Device Label—Label of the left node device in the mesh link.

{

BSS ID—MAC address of the left node device in the mesh link.

{

Channel—Channel used by the left node device in the mesh link.

{

RSSI—RSSI of the left node device in the mesh link.

{

SNR—SNR of the left node device in the mesh link.

Right Node tab

{

Device Label—Label of the right node device in the mesh link.

{

BSS ID—MAC address of the right node device in the mesh link.

{

Channel—Channel used by the right node device in the mesh link.

{

RSSI—RSSI of the right node device in the mesh link.

{

SNR—SNR of the right node device in a mesh link.

Viewing a fat AP mesh topology

1.

Click the Service tab.

2.

Enter the location view topology.
Method 1:

a.

From the navigation tree, select WLAN Manager > Wireless Topology.

b.

From the navigation tree, select Topology > Wireless Topology > Location View.
The location view topology appears.

c.

Double-click a location view icon on the navigation tree, or select Open Topology from the
right-click menu of a location view icon on the topology.
The topology map appears, displaying all sub-location views, fit APs, and fat APs that are
redirected under this level of location view.

Method 2:

a.

From the navigation tree, select WLAN Manager > View Management > Location View.
The Location List displays all location views.

b.

Click the View Topology icon of a location view.
The topology map appears, displaying all sub-location views, fit APs, and fat APs that are
redirected under this level of location view.

3.

Right-click a blank area, and then select Show Mesh Link from the menu.
The topology map displays mesh links between fat APs.

NOTE:

If the location view includes fit APs that connect with each other by mesh link, the location view
topology displays the mesh link between fit APs.

4.

Right-click the link (dotted green line) between fat APs, and then select Link Information from the
menu.
The Mesh Link Information dialog box appears.
Basic Information tab

Advertising