H3C Technologies H3C Intelligent Management Center User Manual
Page 411
389
{
Show Rogues—Displays rogue APs and rogue clients connected to the fit APs by which they
were discovered.
{
Show All Client—Displays all the clients associated with the fit APs managed by the AC.
•
Select Client Link Label, and then select one of the following options to determine the label for
the links between fit APs and clients:
{
Show Radio Type—Uses the radio type of the fit AP as the link label.
{
Show Signal Strength—Uses the signal strength of wireless client as the link label.
{
Show RSSI—Uses the received signal strength indicator of the wireless client as the link label.
{
Show Channel—Uses the channel used by the wireless client as the link label.
{
No Label—Uses no link label.
If you configure the AC device topology to display all the clients associated with the fit APs managed
by the AC by selecting Show Devices >> Show All Clients from the right-mouse click menu, you can
further perform the following operations on a client from the topology:
•
Click the icon of a client. The tip window displays the following information about the client:
{
MAC Address—MAC address of the client. Click the MAC address of a client to view the
client details.
{
Username—Name of the client.
{
SSID Name—SSID used by the client to access the network.
{
Radio Type—Radio type of the fit AP through which the client accessed the network.
{
Signal Strength—Signal strength of the client.
{
RSSI—RSSI value of the signal of the client.
{
Channel—Channel used by the client.
•
Right-click the icon of a client. The menu that appears offers the following options that can be
applied to the client:
{
Client Information—Allows you to view detailed information about the client, including the
MAC address, client name, connection time, signal strength, SSID, and channel. For
Comware-based devices, the client information also includes the authorization mode, AKM
type, encryption mode, and data rates. For more information about the client details, see
Viewing detailed information about a client
."
{
Locate—Allows you to open the location view topology and locate the client on the topology.
For more information, see "
{
Lock/Unlock—Allows you to lock/unlock the position of the client on the topology. A client
cannot be moved after being locked.
Right-click the blank area on the topology, and select Show Devices >> Show Rogues from the
shortcut menu to display rogue devices on the AC device topology. You can perform the following
operations on the rogue devices from the topology:
•
Click the icon of a rogue device. The tip window displays the following information about the
device:
{
MAC Address—MAC address of the rogue device. Click the MAC address of a rogue device
to view the device details. For more information about the rogue device details, see "
detailed information about a rogue client
{
Vendor Name—Rogue device vendor's name.
{
SSID Name—SSID used by the rogue device to provide wireless service. Available for rogue
APs only.