H3C Technologies H3C Intelligent Management Center - Manual (Page 718)

696
− Modify port security.
− Create service policies.
− Bind service templates.
− Configure radios.
• Cisco:
AC Configuration Management—Allows you to perform the following tasks (each in batches):
{
Configure groups.
{
Configure WLANs.
{
Configure radios.
For more information, see " 5 Managing MSM series access controllers ", " 6 Managing Comware-
based access controllers ", " 7 Managing Cisco access controllers ", " 9 Managing MSM series fat
APs ", and " 10 Managing Comware-based fat APs ."
Configuring wireless monitoring settings
This function allows you to enable or disable the wireless performance indexes for monitoring the
performance of the wireless network. You can enable the indexes on these tabs:
• By Report
• By Web Service
• By Overview
• By Network Evaluation
A performance index might appear on multiple tabs. To stop monitoring an index, make sure it is
disabled on all tabs.
To configure wireless monitoring settings:
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Configuration Management.
The Configuration Management page appears.
3. Click the Common tab.
4. In the Network Management area, click the Wireless Monitoring Settings link.
The Wireless Monitoring Settings page appears.
5. Click different tabs, By Report, By Web Service, By Overview, or By Network Evaluation, and
select performance indexes you want WSM to monitor from the Monitor Items list on each tab.
Comware-based devices and MSM series devices support different performance indexes. For
more information, see "
20 Monitoring WLAN performance ."
6. Click OK.
WSM starts to monitor the selected performance indexes on the tabs.
7. To reset counters, click the Re-collect link on the upper right of the page.
WSM resets the Monitored Item Number and Monitored Instance Number fields on the page.