H3C Technologies H3C Intelligent Management Center - Manual (Page 138)

116
2. From the navigation tree, select WLAN Manager > Resource Management > ACs. The AC List
page displays all ACs.
3. Click the device label of the target AC.
4. Click the Load Balance Group link in the AC Configuration area to the right of the page. All
load balancing group information of the AC is displayed in the Load Balance Group List.
5. Click the ID of the load balancing group to which you want to add radios. All radios in the
load balancing group are displayed in the Load Balance Group Radio List.
6. Click Add in the Radio List area.
The Select Device dialog box appears.
7. Enter or select one or more of the following query criteria to search for the radios you want to
configure:
{
AP Label—Enter the label of the fit AP to which the radio belongs. WSM supports fuzzy
matching for this field.
{
AP Name—Enter the name of the fit AP to which the radio belongs. WSM supports fuzzy
matching for this field
{
Serial Number—Enter the serial number of the fit AP to which the radio belongs. WSM
supports fuzzy matching for this field.
{
Radio Type—Select a radio type. Options are:
− 802.11a
− 802.11b
− 802.11g
− 802.11gn
− 802.11an
{
Admin Status—Select an administrative state for the radio. Options are Up and Down.
{
Radio Policy Name—Enter the name of the radio policy bound to the radio. WSM supports
fuzzy matching for this field.
{
Location—Enter or select the name of the location view to which the fit AP belongs. WSM
supports fuzzy matching for this field.
An empty field or a field that is set to Unlimited does not serve as a query criterion.
8. Click Query. The Radio List displays all radios matching the query criteria. Click Reset to clear
the query criteria and display all radios.
9. Select the radios you want to add to the load balancing group.
10. Click OK to close the Select Device window.
The Radio List displays all selected radios.
11. Click OK.
Deleting radios from a load balancing group
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Resource Management > ACs. The AC List
page displays all ACs.
3. Click the device label of the target AC.