Viewing detailed information about a wlan – H3C Technologies H3C Intelligent Management Center User Manual
Page 169
147
To perform related operations, click Related Operations, and select Group Configuration or
Radio Batch Configuration from the menu. For more information, see "
Configuring radio parameters for an AC
Viewing detailed information about a WLAN
1.
Click the Service tab.
2.
From the navigation tree, select WLAN Manager > Resource Management > ACs.
3.
Click the Operation icon
for the target AC and select WLAN Configuration from the menu.
The WLAN List displays all WLANs created on the AC.
4.
Click the WLAN ID link for the target WLAN.
Basic Information
{
Profile Name—Profile name of the WLAN.
{
SSID—SSID of the WLAN.
{
Admin Status—Admin status of the WLAN: Disable and Enable.
{
Broadcast SSID—Whether to enable APs to broadcast their SSIDs, Enable or Disable. Enable
indicates the APs bound with the WLAN will broadcast their SSIDs so that they can be
discovered by clients. Disable indicates the APs do not support SSID broadcasting.
Security Information
{
Encryption—Security policy of the WLAN. For more information, see
.
Table 10 Security information
Security policy Description
None
Open system authentication.
WPA+WPA2
Select at least one policy.
•
WPA Policy.
•
WPA Encryption—Options are AES and TKIP.
•
WPA2 Policy.
•
WPA2 Encryption—Options are AES and TKIP.
•
Auth Key Mgmt—Enter a key authentication management method.
Options are 802.1X, CCKM, PSK, and 802.1X+CCKM.
If you select PSK as the authentication key management method, set
the PSK:
•
PSK Format—Options are HEX and ASCII.
•
PSK—If the PSK format is HEX, enter a hexadecimal number of 64
bits. If the PSK format is ASCII, enter a string of 8 to 63 characters.
802.1X
802.11 Data Encryption:
•
Type—Data encryption mode. Only WEP is supported.
•
Key Size—Select a shared key size. Options are 40bits and
104bits.
Besides the above parameters, log in to the AC to configure AAA and
select a RADIUS server for the WLAN. For more information, see the
configuration guide of the AC.
Static WEP
802.11 data encryption:
•
Type—Enter the data encryption mode. Only WEP is supported.