Drawing a digital fence, Locating clients, Locating a client – H3C Technologies H3C Intelligent Management Center User Manual
Page 558
536
The Location List page appears.
3.
Click the View Topology icon for the location view.
The location view topology page appears, displaying all sub-location views, fit APs, and fat
APs.
4.
Right-click on a blank area, and, from the shortcut menu, select MU Locating Region Mgt.
You are in MU locating region management mode.
5.
Right-click on a blank area, and, from the shortcut menu, select Draw Obstacle.
6.
Click each vertex on the obstacle region one by one, and double-click to finish.
7.
Click icon to quit the drawing mode.
Drawing a digital fence
Digital fences do not affect client locating. WSM records locations of clients accessing a digital fence
for statistics analysis.
To draw an obstacle region:
1.
Click the Service tab.
2.
From the navigation tree, select WLAN Manager > View Management > Location Views.
The Location List page appears.
3.
Click the View Topology icon for the location view.
The location view topology page appears, displaying all sub-location views, fit APs and fat APs.
4.
Right-click on a blank area, and, from the shortcut menu, select MU Locating Region Mgt.
You are in MU locating region management mode.
5.
Right-click on a blank area, and, from the shortcut menu, select Draw Digital Fence.
6.
Click each vertex on the digital fence one by one, and double-click to finish.
7.
Click icon to quit the drawing mode.
Locating clients
This function can locate clients and display the locations in location view. The system adjusts the
locations of the clients after client locating.
Locating a client
•
Method 1:
a.
Click the Service tab.
b.
From the navigation tree, select WLAN Manager > Locating Management.
The Locating Management page appears.
c.
In the MU Locating area, click the Monitoring Clients link.
The Monitoring Clients page appears, displaying all clients being monitored.
d.
Click the Locate icon
in the Locate column.
The client is located and highlighted on the location view topology.
•
Method 2:
e.
Click the Service tab.
f.
From the navigation tree, select WLAN Manager > View Management > Location Views.