H3C Technologies H3C Intelligent Management Center - Manual (Page 380)

358
Monitoring fit APs in real time
WSM provides real-time monitoring on MSM series fit APs, and displays the monitoring information
on the following tabs:
• AP
• Wireless Rates
• Neighborhood Status
• Local Mesh Neighborhood
• Local Mesh Link
• Bridge Status
• Wireless Ports
For information about monitoring MSM series fit APs in real time, see " Monitoring fit APs in real
time ."
WSM provides real-time monitoring on Comware-based fit APs, and displays the monitoring
information on the AP and Radio tabs. For information about monitoring Comware-based fit APs in
real time, see " Monitoring fit APs in real time ."
Monitoring clients in real time
WSM provides real-time monitoring for clients. The monitored objects vary depending on the vendors
of the APs that provide clients with WLAN access (see Table 34 ). For information about monitoring
clients in real time, see " Performing real-time monitoring for a client ."
Table 34 Real-time monitoring objects for clients
AP vendor Real-time monitoring objects
MSM series
• Sending and receiving rate trend graph
• Signal strength trend graph
• Receiving noise trend graph
• Signal and noise strength ratio trend graph
• Receiving packets
• Receiving rate
• Sending packets
• Sending rate
• Signal strength (dBm)
• Receiving noise
• User connection duration
• Signal and noise strength ratio