H3C Technologies H3C Intelligent Management Center - Manual (Page 503)

481
5. Click OK.
Assigning/removing an AP to/from a static list
1. Click the Service tab.
2. Select WLAN Manager > WIPS Management > APs Detected from the navigation tree.
The Detected AP List displays all detected APs.
3. Select the target AP, and click Operation in the Detected AP List area, and then select Add to
Static Trusted Address List, Add to Alarm Ignored Address List, Add to Static Blocked Address
List, or Add to Static Countermeasures List from the menu.
Or, click the Add to list icon for a static list in the Static List Status column of an AP to add it
to the static list. Click the Remove from list icon
for a static list in the Static List Status column
of an AP to remove it from the static list.
An AP cannot be on the Static Trusted Address List and the Static Blocked Address List at the same
time. To add an AP to either list, first remove it from the other list.
Viewing the detected AP history
1. Click the Service tab.
2. Select WLAN Manager > WIPS Management > APs Detected from the navigation tree.
The Detected AP List displays all detected APs.
3. Click the History link to the right of the Detected AP List.
The Detected AP History List displays all detected AP history records.
Detected AP History List
{
MAC Address—MAC address of the detected AP. Click the MAC address to view the AP
details.
{
SSID—SSID used by the AP.
{
Last Detection Time—Time when the AP was last detected.
{
Disappeared At—Time when the AP can no longer be detected.
{
Virtual Security Domain—Virtual security domain to which the sensor that detected the AP
belongs.
{
Category—Category of the AP, Authorized, Rogue, Ad hoc, Misconfigured, External,
Potential-Authorized, Potential-Rogue, Potential-External, or Uncategorized.
{
Device vendor info—Vendor of the detected AP. If the sensor does not obtain vendor
information about the AP, this field displays null.
{
Threat Level—Threat level of the AP. The greater the value, the higher the threat level.
{
Detecting AC—Device label of the AC with which the sensor that detected the AP is
associated. Click the label to view the AC details.
4. Click the Back icon to go back to the Detected AP List.