H3C Technologies H3C Intelligent Management Center User Manual

Page 97

Advertising
background image

75

{

Primary DNS—IP address of the primary DNS server assigned by PPTP.

{

Secondary DNS—IP address of the secondary DNS server assigned by PPTP.

{

Connection Time—Amount of time (hh:mm:ss) the controller or integrated services access
point has been connected to the PPTP server.

{

Tx packets—Number of packets transmitted.

{

Tx dropped—Number of transmitted packets that were dropped.

{

Tx errors—Number of packets with transmission errors.

{

Rx packets—Number of packets received.

{

Rx dropped—Number of received packets that were dropped.

{

Rx errors—Number of packets received with errors.

•

VPN Users list contents

{

Username—Name with which the VPN user logged in.

{

VLAN ID—Identifier of the VLAN.

{

Local IP address—IP address assigned to the VPN user on the local network.

{

Remote IP address—IP address assigned to the VPN user on the remote network.

{

Connection Time—Time that the VPN connection was established (HH:MM:SS).

{

Connection Type—Type of VPN connection.

{

Port—Port where the VPN connection was established.

Ports Status tab

•

Status—Icon in green indicates the port connection is active. An icon in red indicates the port
connection is not active.

•

Port—Name of the port (LAN, Internet, or bridge).

•

Tx Packets—Number of transmitted packets.

•

Tx Dropped—Number of transmitted packets dropped.

•

Tx Errors—Number of packets with transmission errors.

•

Rx Packets—Number of received packets.

•

Rx Dropped—Number of received packets dropped.

•

Rx Errors—Number of packets received with errors.

•

Collisions—Collisions indicate how many times two wireless clients tried to use the network
simultaneously. A small number of collisions is normal. A large number of collisions indicates

that not enough bandwidth exists to support the traffic on the network.

•

Ethernet Link Speed (Mbps)—Indicates the speed in Mb/s of the Ethernet connection for the port.

•

Ethernet Duplex—Indicates the duplex status of the Ethernet connection for the port.

VLANs Status tab

•

VLAN ID—Identifier of the VLAN.

•

Port—Name of port associated with the VLAN.

•

Bytes Received (KB)—Number of bytes received.

•

Bytes Sent (KB)—Number of bytes sent.

•

IP Address/Subnet Mask—IP address and subnet of the device associated with the VLAN.

IPsec Status tab

Advertising