Radio traffic report – H3C Technologies H3C Intelligent Management Center User Manual
Page 656
634
•
Error Ratio—Ratio of the total number of FCS, PHY, and MIC error frames to the total number of
frames received by the AP radio.
Radio traffic report
This report displays traffic statistics for AP radios.
To view a radio traffic report, configure the following parameters:
•
Parameter "Begin Time and End Time"—Select a statistics collection time range from the list. You
can select a specific time range, such as Last Hour, Last Day, Last Week, or Last Month, or
select Custom Range, and then specify the start time and end time manually.
•
Location—Select a specific location view for statistics collection, or select All AP Devices.
•
Begin Time/End Time—These two parameters appear only when you select Custom Range. Click
the field next to Begin Time/End Time to select the start time/end time from the calendar that
appears, in the format of YYYY-MM-DD hh:mm. The end time must be later than the start time.
shows an example radio traffic report.
Figure 95 Radio traffic report
Radio traffic report fields: