H3C Technologies H3C Intelligent Management Center - Manual (Page 360)

338
NOTE:
You can sort the Device List by every field except for the Status and Operation fields. Click the column
label to sort the list by the selected field. The column label allows you to toggle between the various sort
options specific to each field.
Collecting information about fat AP access ports
This function allows you to view the connectivity between the fat AP and the AP access device, and
collect information about fat AP access ports.
Querying fat AP access ports
This function allows you to filter fat AP access ports with specific criteria.
To query fat AP access ports:
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Resource Management > AP Access Ports.
The AP Access Ports page appears.
3. Click the Fat AP tab.
The Device List page displays all fat AP access ports and the related fat AP information.
4. Enter or select one or more of the following query criteria:
{
Device Label—Enter the label of the fat AP. WSM supports fuzzy matching for this field.
{
IP Address—Enter a partial or complete IPv4 address of the fat AP. WSM supports fuzzy
matching for this field.
{
MAC Address—Enter a partial or complete MAC address of the fat AP. WSM supports fuzzy
matching for this field.
{
Serial Number—Enter a partial or complete serial number of the fat AP. WSM supports
fuzzy matching for this field.
{
Vendor—Select the vendor of the fat AP. Options are:
− Unlimited
− H3C
− HP
An empty field or a field that is set to Unlimited does not serve as a query criterion.
5. Click Query.
The Device List displays all fat AP access ports matching the query criteria.
6. Click Reset to clear the query criteria and display all fat AP access ports.
Exporting fat AP access ports
This function allows you to export all fat AP access ports in the device list to a .csv file and saves the
file locally. For more information, see " Exporting fit AP access ports ."