H3C Technologies H3C Intelligent Management Center - Manual (Page 207)

185
{
Authentication Mode—Authentication mode used by the WLAN:
− None
− HTML Authentication
− 802.1X Authentication
− MAC Authentication.
This parameter must be configured on the web manager of the fat AP.
{
Broadcast SSID—Whether to enable fat APs to broadcast their SSIDs:
− Enable—indicates that the fat APs bound with the WLAN will broadcast their SSIDs so
that they can be discovered by clients.
− Disable—indicates that the fat APs do not support SSID broadcasting.
{
Operation—Click the Operation icon to display the operation menu.
From the Operation menu, you can modify and delete the specified WLAN.
Radio List contents
{
Radio ID—ID of the radio. Click the ID to view the radio details.
{
Description—Description for the radio.
{
Radio Type—These are the radio type:
− All, 802.11a
− 802.11b
− 802.11g
− 802.11bg
− 802.11at
− 802.11an
− 802.11gn
− 802.11n (2.4GHz)
− 802.11bgn
− 802.11n
− 802.11n(5GHz)
{
Admin Status—Administrative state of the radio: Up or Down.
{
Channel—Working channel of the radio. If this field displays Auto, a fat AP selects an idle
channel as the working channel.
{
Current Transmission Power (dBm)—Current transmission power of the radio.
{
RF Detection—RF neighbor detection mode: Periodic or Dedicated.
{
Modify—Click the Modify icon of a radio to enter the page for modifying the radio
parameters. For more information about modifying fat AP radio parameters, see "
Modifying
the radio parameters for a fat AP ."
Viewing detailed information about a WLAN on a fat AP
1. Click the Service tab.
From the navigation tree, select WLAN Manager > Resource Management > Fat APs. The Fat
AP List page displays all fat APs.