Site access points and neighbors report – H3C Technologies H3C Intelligent Management Center User Manual
Page 679
657
•
Worst APs—Number of worst APs in the hotspot location view. An AP is considered as worst
when its out of service rate or association congestion rate reaches the specified threshold.
•
Transmitted Traffic (MB)—Total traffic transmitted by the APs in the hotspot location view.
•
Received Traffic (MB)—Total traffic received by the APs in the hotspot location view.
•
Packet Retransmit Ratio (%)—Ratio of the number of retransmitted packets to the total number of
packets transmitted by the APs in the hotspot location view.
•
Error Frame Ratio (%)—Ratio of the number of error frames to the total number of frames
received by the APs in the hotspot location view.
•
Max Transmit Speed (Mb/s)—Maximum transmit speed of the APs in the hotspot location view.
•
Avg Transmit Speed (Mb/s)—Average transmit speed of the APs in the hotspot location view.
•
Max Receive Speed (Mb/s)—Maximum receive speed of the APs in the hotspot location view.
•
Avg Receive Speed (Mb/s)—Average receive speed of the APs in the hotspot location view.
•
Max Online Client Number—Maximum number of online clients in the hotspot location view.
•
Avg Online Client Number—Average number of online clients in the hotspot location view.
•
AP Average Utilization (%)—Average use of the APs, calculated as Avg Online Client Number/X,
where X is the AP usage value specified in the configuration file.
•
AP Peak Utilization (%)—Peak use of the APs, calculated as Max Online Client Number/X,
where X is the AP usage value specified in the configuration file.
•
Total Client Online Duration—Total online duration of the clients.
•
Avg Client Online Duration—Average online duration of the clients.
•
Successful Accesses—Total number times the clients have successfully associated with the APs
contained in the hotspot location view.
•
Success Rate (%)—Ratio of successful accesses to the total number of access requests made by
clients.
•
Association Congestion Rate (%)—Ratio of client association failures to the total number of
association requests.
•
Client Dropping Rate (%)—Ratio of client abnormal logouts to the total number of online clients.
Site access points and neighbors report
This report displays neighbor statistics for all APs or APs in a location view.
To view a site access points and neighbors report, configure the following parameter:
•
Location—Select a specific location view for statistics collection, or select All AP Devices.
shows an example site access points and neighbors report.