H3C Technologies H3C Intelligent Management Center User Manual
Page 648
626
•
Begin Time/End Time—These two parameters appear only when you select Custom Range. Click
the field next to Begin Time/End Time to select the start time/end time from the calendar that
appears, in the format of YYYY-MM-DD hh:mm. The end time must be later than the start time.
shows an example AP traffic summary report.
Figure 89 AP traffic summary report
AP traffic summary report parameters:
•
Report Period—Time range during which the statistics are collected.
•
Position—Name of the location view for which the statistics are collected or All AP Devices.
AP traffic summary report fields:
•
Core Traffic Top 10—Displays the top 10 location views with the highest wired traffic volumes in
a bar chart.
•
Radio Traffic Top 10—Displays the top 10 location views with the highest wireless traffic volumes
in a bar chart.
•
Position—Location view name or All AP Devices.
•
AP Number—Number of APs contained in the location view or total number of all APs.
•
Core Frames Reception—Total number of frames received by the APs from the wired network.
•
Core Errors Reception—Total number of error packets received by the APs from the wired
network.
•
Core Traffic Reception (MB)—Total traffic received by the APs from the wired network.
•
Core Traffic Transmission (MB)—Total traffic sent by the APs to the wired network.
•
Radio Frames Reception—Total number of frames received by the APs from the wireless network.
•
Radio Errors Reception—Total number of error packets received by the APs from the wireless
network.
•
Radio Traffic Reception (MB)—Total traffic received by the APs from the wireless network.
•
Radio Traffic Transmission (MB)—Total traffic sent by the APs to the wireless network.