H3C Technologies H3C Intelligent Management Center - Manual (Page 529)

507
Figure 62 Setting the signal strength color
2. Click the color block to be modified.
The window for modifying the color appears.
3. Select a color.
4. Click OK.
Setting the color for a rate
1. Right-click on a blank area, and from the shortcut menu, select Color Settings > Set Rate Color.
The window for setting rate colors appears, displaying the rate values and their associated
colors, as shown in
Figure 63 .
Figure 63 Setting the rate color
2. Click the color block to be modified.
The window for modifying colors appears.
3. Select a color.
4. Click OK.