H3C Technologies H3C Intelligent Management Center - Manual (Page 191)

169
2. From the navigation tree, select WLAN Manager > Resource Management > ACs.
3. Click the operation icon for the target Aruba AC, and select Radio Policy from the menu.
The Radio Policy Management page appears and all radio policies are displayed in the radio
policy list.
4. Click Add.
The Add Radio Policy page appears.
5. Configure basic information about the radio policy.
{
Radio Policy Name—Enter a name for the radio policy, in the range of 1 to 63 characters.
For more information about available characters, see the tip information.
{
Radio Type—Select a radio type for the radio. Options are 802.11a and 802.11g.
{
Admin Status—Select an administrative status for the radio. Options are Up and Down.
{
Channel—Select a working channel for the radio.
{
Transmission Power (dBm)—Select a transmission power for the radio. The maximum value is
127 dBm.
6. Click OK.
Modifying a radio policy
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Resource Management > ACs.
3. Click the operation icon for the target Aruba AC, and select Radio Policy from the menu.
The Radio Policy Management page appears and all radio policies are displayed in the radio
policy list.
4. Click the icon for the target radio policy.
The Modify Radio Policy page appears.
5. Modify information about the radio policy.
You cannot modify the radio policy name or radio type. For more information about other
parameters, see "
Adding a radio policy ."
6. Click OK.
Binding a radio policy to an AP group or unbinding a radio
policy from an AP group
A radio policy can be used by the APs in an AP group only after it is bound to the group. A radio
policy can be bound to multiple AP groups.
By default, a radio policy is not bound to any group.
To bind a radio policy to an AP group or unbind a radio policy from an AP group:
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Resource Management > ACs.
3. Click the operation icon for the target Aruba AC, and select Radio Policy from the menu.