Grass Valley EDIUS Neo 3 - Manual (Page 330)

328 EDIUS NEO — User Reference Guide
Section 5 — Timeline Operations
Deleting In and Out Points on the Timeline
To delete In and Out points on the Timeline, do the following:
1. Click the list button ( ) of the Set In or Set Out button in the Recorder.
2. Select Clear In Point or Clear Out Point respectively from the menu.
Alternative Methods:
• Press the [ ALT ]+[ I ] keys to clear the In point.
• Press the [ ALT ]+[ O ] keys to clear the In point.
• Right-click on the time scale and select Clear In Point or Clear Out Point
from the menu.
• Select Marker on the menu bar and select Clear In Point or Clear Out
Point from the menu.
You can delete both In and Out points simultaneously by any of the fol-
lowing methods:
• Right-click on the time scale and select Clear In/Out Point.
Note If you select Delete In/Out Point from the menu, both the In and Out points
and the clip between these points is deleted.
• Select Marker on the menu bar and select Clear In/Out Point.
• Press [X] on the keyboard.
Three-Point Editing
Three-point editing is the placing of a clip between the In and Out points of
the Timeline as illustrated in
Figure 361 or the placing of a clip with In and
Out points at the Timeline In or Timeline Out point.
As long as three of the four possible In and Out points (Clip In/Out and
Timeline In/Out) are defined, the fourth is automatically determined as
clip speed is constant.
Figure 361. Three-Point Editing