Reset to defaults – Grass Valley EDIUS Neo 3 User Manual
Page 708
706
EDIUS NEO — User Reference Guide
Section 7 — Audio Operations
Note
Pan adjustments are disabled if the track operation is set to Latch, Touch or
Write. The Pan controls are enabled only when the track operation is set to
Track or Clip. See Set the Track Operation
for more information
on track operations.
3.
Using the Pan Control as illustrated in
, adjust the pan setting
as desired.
Figure 863. Audio Mixer Pan Control Detail
Reset to Defaults
To reset the settings of all or selected tracks to the defaults, right-click on
the track name, pan control, volume control or operation buttons of a track
in the Audio Mixer and select Reset or Reset All from the menu. See
•
Reset - resets to the defaults all settings for the selected track only.
•
Reset All - resets to the defaults all settings for all tracks including the
selected track.
Place Cursor on
Pan Control
Hold Down Left
Mouse Button and
Move Mouse in
Desired Direction
Release Mouse
Button to Set Pan