On dialog illustrated in, Figure 80 – Grass Valley EDIUS Neo 3 User Manual
Page 87
Advertising
EDIUS NEO — User Reference Guide
85
Hardware Settings
Figure 80. Device Preset Select Icon Dialog
5.
Select the desired device preset icon from the default list or click the
...
button to browse to a different location to select the device preset icon.
6.
Click the
OK
button to close the Select Icon dialog.
7.
Click the
Next
button.
The Input H/W Format Settings dialog depicted in
appears.
Note
In the Interface selection, Generic OHCI should be selected for devices
attached via FireWire (IEEE1394) connections and DirectShow should be
selected for USB attached devices.
Advertising
This manual is related to the following products: