Grass Valley EDIUS Neo 3 - Manual (Page 331)

EDIUS NEO — User Reference Guide 329
In and Out Points
To perform three-point editing, do the following:
1. Select a clip in the Asset Bin and click the Show in Player button (see
Figure 362 ).
Figure 362. Asset Bin - Show in Player
Check the video in the Player and set In and Out points if necessary.
2. Set the In and/or Out points on the Timeline (see Setting In and Out
Points on Timeline
on page 326 ).
3. Click the Insert to Timeline button.
Note Click the Overwrite to Timeline button to replace the clip at the Time-
line In/Out position.
The clip is positioned between the In and Out points on the target track of
the Timeline and trimmed in length (if necessary). If only one of the Time-
line points was defined, the other is automatically determined based on
clip length.
The playback speed of the positioned clip is unchanged.
Four-Point Editing
Four-point editing is placing the In and Out points of a clip between the In
and Out points of the Timeline
Figure 363 .