Grass Valley EDIUS Neo 3 - Manual (Page 96)

94 EDIUS NEO — User Reference Guide
Section 2 — Settings and Configuration
2. Select the output connection you wish to configure and click the Settings
button.
If the current project settings and the display capabilities of the preview
device do not match, the warning messages illustrated in
Figure 89
appears.
Figure 89. Switching to Software Preview Mode
If this message appears, click the OK button and choose project settings in a
format supported by the display device.
If the project settings and the format capabilities of the attached preview
device match, the Device Settings dialog shown in
Figure 90 appears.