9 sntp broadcast client enable, 10 sntp anycast client enable, Syntax – PLANET WGSD-1022 User Manual
Page 156: Default configuration, Command mode, User guidelines, Examples
5.5.9 sntp broadcast client enable
The sntp broadcast client enable global configuration command enables the Simple Network Time
Protocol
(SNTP) broadcast clients. To disable the SNTP broadcast clients, use the no form of this command.
Syntax
sntp broadcast client enable
no sntp broadcast client enble
This command has no arguments or keywords.
Default Configuration
Disabled
Command Mode
Global configuration mode
User Guidelines
The sntp broadcast client enable interface configuration command enables the device to receive
broadcast transmissions globally and on ALL interfaces.
Use the sntp client enable interface configuration command to enable sntp client on specific interface.
Examples
The following example enables the SNTP broadcast clients.
Console (config)#sntp broadcast client enable
5.5.10 sntp anycast client enable
The sntp anycast client enable global configuration command enables anycast client. To disable the
polling for SNTP broadcast client, use the no form of this command.
Syntax
sntp anycast client enable
no sntp anycast client enable
This command has no arguments or keywords.