PLANET WGSD-1022 - Manual (Page 251)

ƒ type type — The sampling method for the selected variable and calculating the value to be
compared against the thresholds. If the method is absolute, the value of the selected variable is
compared directly with the thresholds at the end of the sampling interval. If the method is delta,
the selected variable value at the last sample is subtracted from the current value, and the
difference compared with the thresholds.
ƒ startup direction — The alarm that may be sent when this entry is first set to valid. If the first
sample (after this entry becomes valid) is greater than or equal to the rthreshold, and direction is
equal to rising or rising-falling, then a single rising alarm is generated. If the first sample (after
this entry becomes valid) is less than or equal to the fthreshold, and direction is equal to falling or
rising-falling, then a single falling alarm is generated.
ƒ owner name — Enter a name that specifies who configured this alarm. If unspecified, the name is
an empty string.
Default Configuration
The following parameters have the following default values:
type type — If unspecified, the type is absolute.
startup direction — If unspecified, the startup direction is rising-falling.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example configures the following alarm conditions:
ƒ Alarm index — 1000
ƒ Variable identifier — abc
ƒ Sample interval — 360000 seconds
ƒ Rising threshold — 1000000
ƒ Falling threshold — 1000000
ƒ Rising threshold event index — 10
ƒ Falling threshold event index — 20
Console (config)# rmon alarm 1000 abc 360000 1000000 1000000 10 20