PLANET WGSD-1022 User Manual

Page 60

Advertising
background image

the outlying CIST root.

• Internal, indicates the port is an internal port.

• Role

Indicates the port role assigned by the STP algorithm in order to
provide to STP paths. The possible field values are:

• Root, provides the lowest cost path to forward packets to root

device.

• Designated, indicates the port or LAG via which the designated

device is attached to the LAN.

• Alternate, provides an alternate path to the root device from the

root interface.

• Backup, provides a backup path to the designated port path

toward the Spanning Tree leaves. Backup ports occur only when
two ports are connected in a loop by a point-to-point link.
Backup ports also occur when a LAN has two or more
connections connected to a shared segment.

• Disabled, which indicates the port is not participating in the

Spanning Tree.

• Interface Priority

Defines the interface priority for specified instance.

The default value is 128.

• Path Cost

Indicates the port contribution to the Spanning Tree instance. The
range should always be 1200,000,000.

• Designated Bridge

ID

Where indicates that the bridge ID number that connects the link or
shared LAN to the root.

• Designated Port ID By which indicates that the Port ID number on the designated bridge

that connects the link or the shared LAN to the root.

• Designated Cost

Indicates that the default path cost is assigned according to the
method selected on the Spanning Tree Global Settings screen.

• Forward Transitions This indicates the number of times the port has changed from the

Forwarding state to Blocking state.

• Remaining Hops

Indicates the hops remaining to the next destination.

„

MSTP Interface status table

The page displays the current MST Interfaces configuration and status.

Advertising