PLANET WGSD-1022 - Manual (Page 342)

6
Console (config)# interface ethernet e8
Console (config-if)# dot1x max-req 6
5.29.10 dot1x timeout supp-timeout
The dot1x timeout supp-timeout interface configuration command sets the time for the retransmission
of an Extensible Authentication Protocol (EAP)-request frame to the client. Use the no form of this
command to return to the default setting.
Syntax
dot1x timeout supp-timeout seconds
no dot1x timeout supp-timeout
ƒ seconds — Time in seconds that the switch should wait for a response to an EAP-request frame
from the client before resending the request. (Range: 1 - 65535 seconds)
Default Configuration
30
Command Mode
Interface configuration (Ethernet) mode
User Guidelines
The default value of this command should be changed only to adjust to unusual circumstances, such as
unreliable links or specific behavioral problems with certain clients and authentication servers.
Examples
The following example sets the time for the retransmission of an EAP-request frame to the client, to 3600
seconds.
Console (config)# dot1x timeout server-timeout 3600
5.29.11 dot1x timeout server-timeout
The dot1x timeout server-timeout interface configuration command sets the time for the retransmission
of packets to the authentication server. Use the no form of this command to return to the default setting.
Syntax
dot1x timeout server-timeout seconds
no dot1x timeout server-timeout