PLANET WGSD-1022 - Manual (Page 209)

5.12 Line Commands
5.12.1 line
The line global configuration command identifies a specific line for configuration and enters the line
configuration command mode.
Syntax
line {console | telnet | ssh}
ƒ console — Console terminal line.
ƒ telnet — Virtual terminal for remote console access (Telnet).
ƒ ssh — Virtual terminal for secured remote console access (SSH).
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example configures the device as a virtual terminal for remote console access.
Console(config)# line telnet
Console(config-line)#
5.12.2 speed
The speed line configuration command sets the line baud rate.
Syntax
speed {bps}
ƒ bps — Baud rate in bits per second (bps). The options are 2400, 9600, 19200 and 38400.
Default Configuration
This default speed is 115200.
Command Mode
Line Configuration (console) mode