2 tacacs-server key, Example, Syntax – PLANET WGSD-1022 User Manual
Page 306: Default configuration, Command mode, User guidelines, Examples
If no host-specific timeout, key or source values are specified, the global values apply to each host.
To define TACACS server on the out-of-band port, use the out-of-band IP address format:
oob/ip-address.
Example
The following example specifies a TACACS+ host.
Console (config)# tacacs-server host 172.16.1.1
5.25.2 tacacs-server key
The tacacs-server key command in global configuration mode sets the authentication encryption key
used for all TACACS+ communications between the device and the TACACS+ daemon. To disable the
key, use the no form of this command.
Syntax
tacacs-server key key-string
no tacacs-server key
key-string — Specifies the authentication and encryption key for all TACAS communications
between the router and the TACACS server. This key must match the encryption used on the
TACACS daemon. (Range: Up to 160 characters)
Default Configuration
Empty string
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example sets the authentication encryption key.
Console (config)# tacacs-server key abc-s