PLANET WGSD-1022 - Manual (Page 296)

5.23.10 show version
The show version user EXEC command displays the system version information.
Syntax
show version
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays a system version (this version number is only for demonstration
purposes).
Console> show version
SW version x.x.x.xx (date xx-xxx-xxxx time 17:34:19)
Boot version x.x.x.xx (date xx-xxx-xxxx time 11:48:21)
HW version x.x.x
5.24 Syslog Commands
5.24.1 logging on
The logging on global configuration command controls error messages logging. This command sends
debug or error messages to a logging process, which logs messages to designated locations
asynchronously to the process that generated the messages. To disable the logging process, use the no
form of this command.
Syntax
logging on
no logging on
Default Configuration
Logging is enabled.